您好,欢迎访问无锡金星弯管厂官网!

弯管、弯管加工

厂家直销更实惠

专业产品检测

值得您信赖

全国咨询热线

0510-85851922

无锡金星弯管厂
您的位置:首页 > 资讯动态 > 行业知识

联系我们

地址:无锡市新吴区南开路70号湖东工业园7号房

咨询热线:

137-7144-5261

0510-85851922

我国弯管的加工流程标准有哪些

发布时间:2019-05-03人气:41

弯管技术广泛应用于锅炉及压力容器行业,中央空调制造业、汽车工业、航空航天工业、船舶制造业等多种行业,弯管质量的好坏,将直接影响到这些行业的产品的结构合理性,安全性、可靠性等,下面我们来看看弯管的加工流程标准有哪些?弯管机任务时,在管子弯度行程领域左近不准有人,并设立防护警示标志。撬管子时要站稳,避免被撬棒打滑击伤。操作人员只能站在外侧。

Bending pipe technology is widely used in boiler and pressure vessel industry, central air conditioning industry, automobile industry, aerospace industry, shipbuilding industry and other industries. The quality of bending pipe will directly affect the structural rationality, safety and reliability of products in these industries. Now let's see what the processing process standards of bending pipe are. No one is allowed near or left in the field of pipe bending stroke and a protective warning sign is set up when the pipe bender is working. Stand firm when prying pipes to avoid being slipped and injured by prying rods. Operators can only stand outside. 

在空车试运转时,检验机械运转能否正常,电器开关能否灵敏好用。所有正常后,再实行任务。检验弯管机上的防护安装能否残缺,如没有装好,就不准开车。中频弯管机应有良好接地和电气绝缘,电压应稳固。两人一同任务时要亲密配合,协调相同。应指定专人操作开关。操作时不准与旁人谈笑,以防误举措。

在空车试运转时,检验机械运转能否正常,电器开关能否灵敏好用。 After all is normal, the task will be carried out again. Check whether the protective installation on the pipe bender is incomplete or not. If it is not installed properly, it is forbidden to drive. Medium frequency pipe bender should have good grounding and electrical insulation, and the voltage should be stable. When two people work together, they should cooperate closely and coordinate equally. Specialized operator shall be designated to operate the switch. Don't talk and laugh with others in order to avoid mistake.


校正管子要留意周围平安,运用榔头要先浸入水中;数分钟,避免脱柄伤人。敲管时制止戴手套。

The calibration pipe should be safe around, the hammer should be immersed in water first, and the handle should be removed for several minutes to avoid injuring people. Stop wearing gloves when knocking.


热弯、校正管子时,脸部要避开管口,避免因管予振动时热砂喷出伤人。灌黄砂时,要将管子吊牢,避免倾倒。管内不得有油污,应选用枯燥的黄砂。

When bending and correcting pipes, the face should avoid the orifice of pipes, so as to avoid the injury caused by hot sand ejection when the pipes vibrate. When filling yellow sand, the pipe should be hanged to avoid dumping. There should be no oil pollution in the pipe. Dry yellow sand should be selected.

运用煤气时要先开启炉门,吹掉积余煤气后再点火。

When using gas, the furnace door should be opened first, and the residual gas should be blown off before ignition.

辛苦整理!转载请注明来自 http://ztjszp.com/show.asp?id=96

你觉得这篇文章怎么样?

0 0
网友评论

管理员

该内容暂无评论

美国网友

推荐资讯